Subaru Legacy BN/BS (2015-2019) Service Manual: Fuel injector

Installation

1. Install O-ring (A), O-ring (B), and backup ring (C) to the pressure regulator.NOTE:• Use new O-rings.• Apply gasoline to the O-ring and backup ring.2. Install the pressure regulator to ...

Removal

1. Release the fuel pressure. Fuel > PROCEDURE2. Disconnect the ground terminal from battery sensor. NOTE3. Open the fuel filler lid and remove the fuel filler cap.NOTE:This operation is required to ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the air intake duct. Air Intake Duct > REMOVAL3. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B) from the air cleaner case (rear).4. Loosen the clamp (A) securing the ...