Subaru Legacy BN/BS (2015-2019) Service Manual: General description

Installation

1. Install the battery sensor, and connect the connector (B) to the battery sensor.Tightening torque:6 N·m (0.6 kgf-m, 4.4 ft-lb)2. Attach the clip (A) to the battery holder.3. Connect the grou ...

Specification

ItemSpecificationsStarterTypeReduction typeModelM000T20176ZCManufacturerMitsubishi ElectricVoltage and output12 V — 1.4 kWDirection of rotationCounterclockwise (when observed from pinion)Number of p ...

Other materials:

Disassembly
1. Disconnect the clutch pipe from the master cylinder.2. Remove the clutch damper mounting nut from the pedal assembly, and disconnect the clutch pipe from the clamp.3. Remove the clutch switches.4. Remove the clip and pull out the clevis pin.(A)Clevis pin(B)Clip5. Disconnect the connector from the ...