Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Oil pump chain / Inspection

• Check the oil pump chain for damage.

• Replace if gear teeth are broken, damaged, sharpen or excessively worn.

• Check the bearing for seizure or wear.

• Apply CVTF to bearing and rotate the bearing to check for noise or dragging etc.

• Check the oil pump chain cover for damage.

• Check for leakage of CVTF from the mating surface of oil pump chain cover.

• Check the oil seal for damage.

Installation

1. Clean the mating surface of oil pump chain cover and converter case.2. Using the ST, install the oil seal.NOTE:• Use a new oil seal.• Apply CVTF to the oil seal lip and press-fitting su ...

Disassembly

1. DRIVE SPROCKET1. Remove the snap ring.2. Remove the ball bearing using ST.ST1 498077600REMOVERST2 399513600INSTALLER ...

Other materials:

Airbag module disposal (deployment processing on vehicle) procedure
WARNING:Make sure to follow the instructions below. Otherwise, personal injuries may occur.• Before discarding an airbag module, always perform an operation process to prevent any false activation.• Wear protective gloves, safety goggles and earplugs during this operation. Wash your hand ...