Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Transmission control device / Inspection

Make sure that the manual plate and detent spring are not worn or otherwise damaged.

Removal

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the inhibitor switch. Inhibitor Switch > REMOVAL3. Remove the oil pan and oil strainer. Oil Pan and Strainer ...

Installation

1. Install the parking support.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Install the extension case. Extension Case > INSTALLATION3. Install the manual valve.4. Install the parking ro ...

Other materials:

Inspection
1. CHECK SWITCH UNITMeasure the resistance between connector terminals of the X mode switch. Terminal No.StandardOFF (when measured without operating the switch)No. 1 — No. 41 M- or moreON (when measured with the switch held down)Less than 1 -2. CHECK X MODE SYSTEMRefer to “CVT (TR580)&rdquo ...