Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Transfer reduction driven gear / Inspection

• Check the ball bearing for smooth rotation.

• Check the ball bearing for excessive looseness.

• Make sure the gear is not broken or damaged.

Installation

1. Install the reduction driven gear assembly.2. Select shims. Transfer Reduction Driven Gear > ADJUSTMENT3. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION4. Install the rear d ...

Disassembly

1. Using the ST, remove the ball bearing (large) from transfer reduction driven gear.ST1 899864100REMOVERST2 398497701SEATST3 498077600REMOVER2. Using the ST, remove the ball bearing (small) ...

Other materials:

Ignition switch (models without pushbutton start system)
WARNING Never turn the ignition switch to "LOCK" while the vehicle is being driven or towed because that will lock the steering wheel, preventing steering control. And when the engine is turned off, it takes a much greater effort than usual to steer. ...