Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Check that the intake manifold assembly and fuel pipe assembly have no deformation, cracks and other damages. 2. Check that the hose has no cracks, damage or loose part. 3. Check tumble generator valve for contamination or clogging. |
Installation
1. Install the intake manifold assembly onto cylinder head.NOTE:• Use a new gasket.• Be careful not to let the engine harness be caught by the parts.Tightening torque:25 N·m (2.5 kg ...
Disassembly
1. Remove the throttle body. Throttle Body > REMOVAL2. Remove the EGR pipe. EGR Pipe > REMOVAL3. Remove the EGR control valve. EGR Control Valve > REMOVAL4. Remove the purge control solenoid valve. ...
Other materials:
Inspection
1. Park the vehicle at a level place where there are enough area at the rear of the vehicle.2. Attach the tape as the target point for standard at the floor rearward of the vehicle as shown in the figure below.NOTE:Standard tape width is about 30 — 50 mm (1.18 — 1.97 in) and brilliant color shal ...
© 2017-2025 Copyright www.sulegacy.com
