Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
Check that the fuel pump control unit has no deformation, cracks or other damages. |
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trunk trim panel assembly - side on the RH side. (Sedan model) Rear Quarter Trim > REMOVAL3. Remove the right side rear quart ...
1. Connect the connector to the fuel pump control module.2. Install the fuel pump control module.Tightening torque:5 N·m (0.5 kgf-m, 3.7 ft-lb)3. Install the trunk trim panel assembly - side on ...
Other materials:
Installation
1. EGR PIPE A1. Temporarily attach the EGR pipe A to the cylinder head and the EGR control valve.NOTE:Use a new gasket.2. Tighten the bolts securing the EGR pipe A to the EGR control valve.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)3. Lift up the vehicle.4. Tighten the bolts securing the ...