Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Check that the intake manifold and fuel pipe assembly have no deformation, cracks and other damages. 2. Check that the hose has no cracks, damage or loose part. |
Installation
1. Install the intake manifold onto cylinder heads.NOTE:Use a new gasket.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)• RH side• LH side2. Install the bolts securing the EGR pipe ...
Disassembly
1. Remove the fuel injector pipe and the fuel hose, and remove the fuel pipe assembly.2. Remove the engine harness. General Description > COMPONENT3. Remove the EGR control valve. EGR Control Valve ...
Other materials:
Dtc p081a starter disable circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:Failure of engine to startCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:Engine Electrical System ENGI ...
© 2017-2025 Copyright www.sulegacy.com
