Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Manual transmission and differential(6mt) / Transmission mounting system / Inspection

Check the following; repair or replace the faulty parts.

1. CROSSMEMBER AND CUSHION RUBBER

Check the crossmember for bending or damage. Check that the cushion rubber does not have hardening, cracks or other damages.

Removal

1. CROSSMEMBER AND CUSHION RUBBER1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the front under cover. Front Under Cover > REMOVAL4. Remove the center ex ...

Installation

1. CROSSMEMBER AND CUSHION RUBBER1. Install the transmission cushion rubber to the transmission, and tighten the bolt (A).2. Install the transmission cushion rubber to the center crossmember, and temp ...

Other materials:

Disassembly
1. Remove the boot and push rod.2. Apply compressed air through clutch hose attachment hole.NOTE:Face the piston hole down and place a piece of wood underneath to prevent the piston from popping out.3. Separate the piston and piston spring. ...