Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / Control unit / Installation

1. Install the control module.

2. Install the pocket assembly and the back panel - pocket.

3. Connect the ground terminal to battery sensor. NOTE

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the pocket assembly and the back panel - pocket. Glove Box > REMOVAL3. Remove the control module.(1) Disconnect the connector.(2) ...

Evaporator

...

Other materials:

Adjustment
1. Loosen the lock nut, and adjust the stop light switch position until the clearance (A) between the threaded end of the stop light switch and stopper becomes 1.1 mm (0.04 in). Then, tighten the lock nut.Tightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)2. Tighten the lock nut.(a)Stop light swit ...