Subaru Legacy BN/BS (2015-2019) Service Manual: Control unit

Installation

1. Install the heater control assembly.2. Install the control module cover.3. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the pocket assembly and the back panel - pocket. Glove Box > REMOVAL3. Remove the control module.(1) Disconnect the connector.(2) ...

Other materials:

Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Drain approximately 3.0 L (3.2 US qt, 2. ...