Subaru Legacy BN/BS (2015-2019) Service Manual: Intake and exhaust valve specification
Refer to “Cylinder Head” for removal and installation procedures of the intake and exhaust valves. Cylinder Head > REMOVAL Cylinder Head > INSTALLATION |
CAUTION:After warming-up, engine becomes very hot. Be careful not to burn yourself at measurement.1. Before checking the ignition timing, check the following item:(1) Check the air cleaner element is ...
1. Warm up the engine.2. Disconnect the brake booster vacuum hose from the intake manifold assembly.3. Connect the vacuum gauge to the installation area for the brake booster vacuum hose of the intake ...
Other materials:
Disassembly
1. DIFFERENTIAL CASE ASSEMBLY1. Remove the taper roller bearing using the ST.ST 498077000REMOVER2. Remove the hypoid driven gear mounting bolt using the ST.ST 18270KA020SOCKET (E20)3. Remove the differential case (LH).4. Remove the differential bevel gear and washer from differential case.5. R ...