Subaru Legacy BN/BS (2015-2019) Service Manual: Manifold absolute pressure sensor

Installation

1. Install the main relay to the main fuse box.2. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Disconnect the connector (A) from the manifold absolute pressure sensor, and remove the manifold absolute pressure sensor from intake man ...

Other materials:

Dtc b16a7 short in front sub sensor lh (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Shorted between front sub sensor LH circuit and GND circuitWIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Airbag system Airbag System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK POOR C ...