Subaru Legacy BN/BS (2015-2019) Service Manual: Oil flow control solenoid valve

Installation

1. Install the mass air flow and intake air temperature sensor, and connect the connector to the mass air flow and intake air temperature sensor.Tightening torque:1 N·m (0.1 kgf-m, 0.7 ft-lb)2. ...

Removal

1. INTAKE SIDE1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving ...

Other materials:

Dtc c1732 lateral g sensor
DTC DETECTING CONDITION:• A fault is detected if the sensor signal value is not correct.• A fault is detected if the steering angle sensor signal / yaw rate sensor signal change while the lateral G sensor signal indicates a constant value.• A fault is detected if the communication ...