Subaru Legacy BN/BS (2015-2019) Service Manual: Radiator fan and fan motor assembly

Installation

1. Install the radiator lower cushion to the vehicle body.2. Install the radiator to vehicle.NOTE:Make pins on the lower side of radiator be fitted into the radiator lower cushions.3. Remove the ropes ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Drain approximately 3.0 L (3.2 US qt, 2.6 Imp qt) of coolant. Engine Coolant > REPLACEMENT3. Lower the vehicle.4. Remove the air intake ...

Other materials:

Installation
CAUTION:• Do not start the engine before charging refrigerant.• If the engine is started with no refrigerant charge, replace the compressor assembly.• Replace the gasket and O-rings with new parts, and then apply compressor oil.1. Install the expansion valve - cooling.Tightening to ...