Subaru Legacy BN/BS (2015-2019) Service Manual: Rear brake pad

Disassembly

1. Remove the reservoir tank.CAUTION:Be careful not to tighten a vise excessively.(1) Place the master cylinder assembly between aluminum plates and fix it on a vise.(2) Drive out the pin using a punc ...

Replacement

1. Release the parking brake.2. Using the Subaru Select Monitor, go to the brake maintenance mode according to the display screen. Parking Brake System > OPERATIONNOTE:For detailed operation procedur ...

Other materials:

Disassembly
CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.1. HIGH BEAM BULB1. Disconnect the connector.2. Rotate in the direction of arrow shown in the figure to remove the high beam bulb.2. LOW BEAM BULB (HALOGEN TYPE)1. Disconnect the connector.2. Rotate in ...