Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Brake / Rear brake pad / Inspection

1. Check the thickness of the pad - disc brake rear.

NOTE:

• Always replace the pads of both wheels and both sides as a set.

• Replace pad clips if they are twisted or worn.

• Replace the pad if there is oil or grease on it.

• Wear indicators are installed on the pad - disc brake rear inner, and a squeaking sound is heard if the pad is worn to the limit.

	Standard (A)	Wear limit (B)
Pad thickness	9.0 mm (0.354 in)	1.5 mm (0.059 in)

2. If the wear limit is exceeded in the inspection, replace the brake pad. Rear Brake Pad > REPLACEMENT

Replacement

1. Release the parking brake.2. Using the Subaru Select Monitor, go to the brake maintenance mode according to the display screen. Parking Brake System > OPERATIONNOTE:For detailed operation procedur ...

Removal

Other materials:

Installation
1. Install the O-ring to front reduction drive gear.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.2. While holding the torque converter assembly by hand, carefully install it into the torque converter case.NOTE:• Apply CVTF to the oil seal lip.• Do not damage the oil sea ...