Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the instrument panel lower cover. Instrument Panel Lower Cover > REMOVAL 3. Disconnect the connector from the clutch switch and clutch start switch. 4. Remove the clutch switch and clutch start switch. |
Clutch switch
...
Adjustment
1. Loosen the lock nut of the clutch start switch.2. Fully depress the clutch pedal and hold it.3. Adjust the gap (A) of the clutch pedal plate and the clutch start switch to be 2.9 mm (0.11 in).(A)2. ...
Other materials:
Dtc c2544 auto start stop system
DTC DETECTING CONDITION:• When a failure of CAN communication is detected after the ignition switch is ON.• When the power steering control module has a detection error after the ignition switch is ON.TROUBLE SYMPTOM:DTC C2544 is stored in the power steering control module.STEPCHECKYESNO ...
© 2017-2026 Copyright www.sulegacy.com
