Subaru Legacy BN/BS (2015-2019) Service Manual: Clutch switch
1. Install the clutch pipe to the mass damper, clutch damper, master cylinder and pipe grommet.NOTE:Temporarily tighten the clutch pipe (D) to the clutch damper.Tightening torque:T: 15 N·m (1.5 ...
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the instrument panel lower cover. Instrument Panel Lower Cover > REMOVAL3. Disconnect the connector from the clutch switch and cl ...
Other materials:
Adjustment
CAUTION:• When the rearview mirror with compass and home link is removed or replaced, perform calibration and zone setting by following the procedures below.• The zone setting of the vehicle is set to zone “8” at factory setting.1. CALIBRATION1. Before performing calibration, ...