1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the clip (A) from the battery holder. 3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor.
|
Battery sensor
InspectionDtc c2521 speed abnormal
DTC DETECTING CONDITION:Detected when transmitter normal signal is received at a vehicle speed of less than 6 km/h (4 MPH).TROUBLE SYMPTOM:Tire pressure warning light blinks 25 times and then illuminates.WIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Tire Pressu ...