Subaru Legacy BN/BS (2015-2019) Service Manual: Battery sensor

Installation

1. BATTERY1. Install the battery and battery pan.2. Install the battery holder, and install the bolts to the battery box.NOTE:Check that the rod (b) of the battery holder is inserted into the hole (a) ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A) from the battery holder.3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor. ...

Other materials:

Installation
1. Install the intake manifold assembly onto cylinder head.NOTE:• Use a new gasket.• Be careful not to let the engine harness be caught by the parts.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Connect the fuel delivery tube and evaporation hose.(1) Connect the evaporation h ...