Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Starting charging systems(h6do) / Battery sensor / Inspection

Check the battery sensor for deformation, cracks and any other damage.

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A) from the battery holder.3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor. ...

Installation

1. Install the battery sensor, and connect the connector (B) to the battery sensor.Tightening torque:6 N·m (0.6 kgf-m, 4.4 ft-lb)2. Attach the clip (A) to the battery holder.3. Connect the grou ...

Other materials:

Replacement
1. Remove the rear differential. Rear Differential (T-type) > REMOVAL Rear Differential (VA-type) > REMOVAL2. Remove the rear differential side oil seal using a ST or screwdriver wrapped with vinyl tape to prevent the side retainer from scratching.ST 398527700PULLER ASSY3. Using the ST, install ...