Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Exhaust(h4do) / Muffler / Removal

CAUTION:

Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.

1. Lift up the vehicle.

2. Apply a coat of spray type lubricant to the mating area of cushion rubber.

3. Remove the bolts and self-locking nuts which secure the rear exhaust pipe to the muffler.

4. Remove the muffler from the cushion rubber.

CAUTION:

Be careful not to drop the muffler during removal.

5. Remove the cushion rubber and heat shield cover from the vehicle body.

Inspection

1. Check the connections and welded parts for exhaust leaks.2. Make sure there are no holes or rusting.3. Check the cushion rubber for wear or crack. ...

Other materials:

Dtc p0071 ambient air temperature sensor circuit "a" range/performance
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK FOR ANY OTHER DTC ON DISPLAY.Is an ...