Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Exhaust(h4do) / Muffler / Inspection

1. Check the connections and welded parts for exhaust leaks.

2. Make sure there are no holes or rusting.

3. Check the cushion rubber for wear or crack.

Removal

CAUTION:Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.1. Lift up the vehicle.2. Apply a coat of spray type lubricant to the mating area of cushion ru ...

Installation

1. Install the cushion rubber and the heat shield cover to the vehicle body.Tightening torque:10 N·m (1.0 kgf-m, 7.4 ft-lb)2. Install the muffler to the cushion rubber.3. Install the bolts and ...

Other materials:

Inspection
1. Check that the engine coolant temperature sensor has no deformation, cracks or other damages.2. Immerse the engine coolant temperature sensor and a thermometer in water.CAUTION:Take care not to allow water to get into the engine coolant temperature sensor connector. Completely remove any water in ...