Subaru Legacy BN/BS (2015-2019) Service Manual: Secondary speed sensor

Installation

CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• After installing the secondary ...

Removal

CAUTION:Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.1. Remove the transmission from the vehicle. Auto ...

Other materials:

Inspection
1. Remove the bulkhead harness connector from TCM. Transmission Control Module (TCM) > REMOVAL2. Set the ST between the TCM and bulkhead harness.ST 18460AA040CHECK BOARD3. Set the probe of oscilloscope to the check board connector.Terminals:No. 12 (+) — No. 26 (−)(A)+ probe(B)− pro ...