Subaru Legacy BN/BS (2015-2019) Service Manual: Select lever

Inspection

Check the removed cable and replace or adjust if damaged, rusty or malfunctioning.1. Check that the inner cable moves smoothly without drag.2. Check the inner cable for damage and rust.3. Check the ou ...

Removal

1. Shift the select lever to “N” range.2. Disconnect the ground terminal from battery sensor. NOTE3. Lift up the vehicle.4. Remove the center exhaust pipe. (2.5 L model) Center Exhaust P ...

Other materials:

Installation
1. Install the throttle body to the intake manifold.NOTE:Use a new gasket.Tightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)2. Connect the connector (A) to the throttle position sensor, and connect the preheater hose (B) to the throttle body.3. Install the air intake boot. Air Intake Boot > INST ...