Subaru Legacy BN/BS (2015-2019) Service Manual: Shifter fork and rod

Installation

1. Clean the mating surface of the transmission cover and transfer case.2. Install the shift accent plunger and the check ball spring.NOTE:Use new seal rings.Tightening torque:25 N·m (2.5 kgf-m ...

Removal

1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL2. Remove the back-up light switch and the neutral position switch. Switches and Harness > REMOVAL3 ...

Other materials:

Installation
1. Install the regulator and motor assembly - front.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the glass assembly - front door. Front Door Glass > INSTALLATION3. Install the sealing cover - front door.4. Install the trim panel - front door. Door Trim > INSTALLATION5. Connect ...