Subaru Legacy BN/BS (2015-2019) Service Manual: Throttle body

Installation

CAUTION:If lubricant is spilt over the exhaust pipe, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Before installing rear oxygen sensor, apply the anti-seize compound only to ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Drain approximately 3.0 L (3.2 US qt, 2.6 Imp qt) of coolant. Engine Coolant > REPLACEMENT3. Remove the clip (A), and loosen the clamps ...

Other materials:

Inspection
1. Check that the engine coolant temperature sensor has no deformation, cracks or other damages.2. Immerse the engine coolant temperature sensor and a thermometer in water.CAUTION:Take care not to allow water to get into the engine coolant temperature sensor connector. Completely remove any water in ...