Subaru Legacy BN/BS (2015-2019) Service Manual: Transmission control module (tcm)

Installation

1. Install the detent spring to the transmission case.Tightening torque:7 N·m (0.7 kgf-m, 5.2 ft-lb)2. Install the manual plate, parking rod, range select lever and bolt.Tightening torque:7 N&m ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the air cleaner case. Air Cleaner Case > REMOVAL3. Move the lock lever in the arrow direction while pressing the lock button, and ...

Other materials:

Installation
1. Press in a new pilot bearing to the position where it is flush with the flywheel surface or up to 0.4 mm (0.016 in) deeper than that.CAUTION:Do not press the bearing inner ring.(A)Pilot bearing2. Temporarily tighten the crankshaft position sensor plate and flywheel.NOTE:Align the knock pin hole o ...