Subaru Legacy BN/BS (2015-2019) Service Manual: Variator chain

Installation

CAUTION:Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.1. Install the turbine speed sensor.NOTE:• Use ...

Removal

For removal of variator chain, refer to “Primary Pulley and Secondary Pulley”. Primary Pulley and Secondary Pulley > REMOVAL ...

Other materials:

Inspection
• Check each part for damage or dust.• Measure the resistance of each solenoid, sensor and ground wire.NOTE:Measurement should be performed at a temperature of 20°C (68°F).• SolenoidSolenoidTerminal No.StandardPrimary UP solenoidNo. 2 — control valve bodyApprox. 10 ...