Subaru Legacy BN/BS (2015-2019) Service Manual: Vehicle dynamics control system

Operation

1. While the VDC sequence control is performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve is operated.2. VDC s ...

Wiring diagram

Refer to “Vehicle Dynamics Control System” in the wiring diagram. Vehicle Dynamics Control System > WIRING DIAGRAM ...

Other materials:

Inspection
1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness.2. CHECK RELAY1. Measure the resistance between relay terminals.Terminal No.Inspection conditionsStandardCircuit1 — 2Always1 M- or mor ...