Subaru Legacy BN/BS (2015-2019) Owners Manual: Alarm system
The alarm system helps to protect your vehicle and valuables from theft. The horn sounds and the hazard warning flashers flash if someone attempts to break into your vehicle. For models with "keyless access with push-button start system": The system can be armed or disarmed with the keyless access function or access key. The system will not be activated when the push-button ignition switch is in the "ACC" or "ON" position. For models without "keyless access with push-button start system": The system can be armed and disarmed with the remote transmitter. The system will not be activated when the key is inserted into the ignition switch. Your vehicle's alarm system has been set for activation at the time of shipment from the factory. You can set the system for deactivation yourself or have it done by your SUBARU dealer. |
- System alarm operation
- Activating and deactivating the alarm system
- If you have accidentally triggered the alarm system
- Arming the system
- Disarming the system
- Valet mode
- Tripped sensor identification
- Shock sensors (dealer option)
Certification for remote keyless entry system
U.S.-spec. models
FCC ID: CWTWB1U811
FCC ID: CWTWD1U848
CAUTION
FCC CAUTION
Changes or modifications not expressly
approved by the party responsible
for compliance could void
...
System alarm operation
The alarm system will give the following
alarms when triggered.
The vehicle's horn will sound for 30
seconds.
The hazard warning flashers will flash
for 30 seconds.
If any of ...
Other materials:
Dtc b16ed curtain airbag sensor lh initialization error
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Curtain airbag sensor LH initialization errorWIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Airbag system Airbag System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK DTC.Is DTC B1627 dis ...
