Subaru Legacy BN/BS (2015-2019) Service Manual: Assist grip

Ornament installation

1. LETTER MARKAlign the application tape to the following position, and adhere the letter mark.• Sedan model(a)Trunk lid panel end(b)Application tape end (1)Bend the end of the applicatio ...

Removal

1. Pull up the cap (b) while pulling the knob (a) toward you with a flat tip screwdriver or similar tool wrapped with a protection tape.2. Pull the assist grip toward yourself (toward the vehicle cent ...

Other materials:

Disassembly
NOTE:When replacing the coupling sleeve and synchronizer hub, replace them as a set. Because these must engage at the specified point, avoid disassembly as much as possible. If it is necessary to disassemble, mark the engaging points on the splines beforehand.1. Put vinyl tape around the main shaft ...