Subaru Legacy BN/BS (2015-2019) Service Manual: Crankshaft position sensor

Installation

1. Install the camshaft position sensor to the chain cover, and connect the connector to the camshaft position sensor.NOTE:• Use new O-rings.• Apply engine oil to O-ring.Tightening torque: ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.3. Remove the air intake boot from the air cleaner ca ...

Other materials:

Adjustment
1. Install the transfer clutch assembly to the extension case with the transfer driven gear shims and thrust bearings removed.2. Install the thrust bearing.NOTE:Make sure to install in the right direction.3. Using the ST, measure the height “A” from the ST end face to the thrust bearing ...