Subaru Legacy BN/BS (2015-2019) Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)
Subaru Legacy BN/BS (2015-2019) Service Manual / Steering responsive fog lights (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc u0416 invalid data received from vehicle dynamics control module
- Dtc u0101 lost communication with tcm
- Dtc u0402 invalid data received from tcm
- Dtc b2907 front fog light circuit lh
- Dtc b2906 front fog light circuit rh
- Dtc b2902 rear height sensor circuit
- Dtc b2900 ahl control
- Dtc u0122 lost communication with vehicle dynamics control module
- Dtc u1422 invalid data received from body control module body-can
- Dtc u1140 lost communication with body control module body-can
- Dtc u0074 control module communication bus "body-can" off
Electrical specification
1. SRF CMTerminal No.ContentMeasuring conditionStandard1 ←> Chassis groundBattery power supply (right)Always8 — 16 V2 ←> Chassis ground — — — 3 ←> Chassis groundFog light outp ...
Dtc u0416 invalid data received from vehicle dynamics control module
Detected when data from VDC CM is abnormal.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...
Other materials:
Removal
1. FRONT CUSHION RUBBER AND ENGINE MOUNTING BRACKET1. Fully open the front hood. NOTE2. Disconnect the ground terminal from battery sensor. NOTE3. Remove the air intake duct. Air Intake Duct > REMOVAL4. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.5. Remove ...
© 2017-2026 Copyright www.sulegacy.com
