Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Torque converter assembly / Inspection

• Check the protrusion of torque converter center (front boss) is not deformed or damaged.

• Check the ring gear and exterior for break or damage.

Removal

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Pull out the torque converter assembly horizontally.CAUTION:Do not scratch the inside of engaging parts.3. Remove the ...

Installation

1. Install the O-ring to the input shaft.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.2. While holding the torque converter assembly by hand, carefully install it into the torque con ...

Other materials:

Dtc p014c a/f / o2 sensor slow response - rich to lean bank 1 sensor 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK EXHAUST SYSTEM.NOTE:Check the foll ...