Subaru Legacy BN/BS (2015-2019) Service Manual: Torque converter assembly

Installation

CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.• After installing the secondary spe ...

Removal

1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Pull out the torque converter assembly horizontally.CAUTION:Do not scratch the inside of engaging parts.3. Remove the ...

Other materials:

Installation
1. TOUCH SENSOR UPR1. Install the power rear gate touch sensor UPR.(1) Clean the bracket surface of the touch sensor UPR to remove dust and dirt fully.(2) Using a sponge, apply primer to the bracket surface of the touch sensor UPR that is not covered with masking tape.CAUTION:• Do not apply pr ...