Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Front reduction driven gear / Installation

NOTE:

For installation of front reduction driven gear, refer to the “Front Reduction Drive Gear”. Front Reduction Drive Gear > INSTALLATION

Adjustment

1. If the ball bearing is attached, remove the bearing and shims. Converter Case Cover > REMOVAL2. Using the ST, measure height “A” from the ST upper face to the mating surface of the cas ...

Inspection

• Check the drive plate for wear and damage.• Check the driven plate for discoloration (burnt color).• Check for worn snap ring, fatigue or damaged return spring or deformed piston r ...

Other materials:

Dtc p0014 "b" camshaft position - timing over-advanced or system performance bank 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Engine stalls.• Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCE ...