Subaru Legacy BN/BS (2015-2019) Service Manual: Front reduction driven gear

Assembly

1. Using the ST, install the ball bearing to front reduction drive gear.NOTE:Use a new ball bearing.ST 18651AA000INSTALLER2. Using ST1 and ST2, install the ball bearing to front reduction drive gea ...

Removal

NOTE:For removal of front reduction driven gear, refer to the “Front Reduction Drive Gear”. Front Reduction Drive Gear > REMOVAL ...

Other materials:

Installation
1. Install the sensor assembly - headlight beam leveler.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the rear wheels.Tightening torque:120 N·m (12.2 kgf-m, 88.5 ft-lb)3. Lower the vehicle.4. Connect the ground terminal to battery sensor. NOTE5. Perform reinitialization o ...