Subaru Legacy BN/BS (2015-2019) Service Manual: Oil control solenoid

Installation

1. Install the mass air flow and intake air temperature sensor, and connect the connector to the mass air flow and intake air temperature sensor.Tightening torque:1 N·m (0.1 kgf-m, 0.7 ft-lb)2. ...

Removal

CAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Disconnect the ground terminal from battery sensor. NOT ...

Other materials:

Assembly
1. Install the new ball bearing (large) to reduction driven gear using the ST.ST 499277100BUSHING 1-2 INSTALLERNOTE:• Use a new ball bearing.• Install to the splines inside transfer reduction driven gear shaft.2. Install the new ball bearing (small) to reduction driven gear.NOTE:Use a ...