Subaru Legacy BN/BS (2015-2019) Service Manual: Power rear gate driver’s switch

Installation

1. Install the power rear gate drive unit (PRG D/U).Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Install the trim panel - rear apron LH and trim panel - rear quarter trim UPR rear LH.3. I ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL3. Release the claws, and then remove the ...

Other materials:

Dtc p0507 idle control system rpm - higher than expected
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:Engine keeps running at higher speed than specified idle speed.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspe ...