Subaru Legacy BN/BS (2015-2019) Service Manual: Power transistor (auto a c model)

Installation

1. When replacing the actuator with a new part, apply a thin coat of grease evenly to the contact area (a) inside the rail of link plate by using approx. 5 mm (0.2 in) width and approx. 0.1 g (0.004 o ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Release the hook, and remove the under cover assembly - passenger.3. Remove the power transistor.(1) Disconnect the connector.(2) Remove ...

Other materials:

Assembly
CAUTION:Wrap shaft splines with vinyl tape to protect the boot from scratches.NOTE:Use specified grease.BJ, EBJ side:NKG814DOJ side:NKG8141. Install the BJ or EBJ boot in specified position, and fill it with 50 to 60 g (1.76 to 2.12 oz) of specified grease.2. Place the DOJ boot at the center of shaf ...