Subaru Legacy BN/BS (2015-2019) Service Manual: Rear drive shaft

Installation

CAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.1. Install the primary speed sensor.NOTE:• Use ...

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the extension case. Extension Case > REMOVAL3. Remove the rear drive shaft. ...

Other materials:

Inspection mode procedure
It is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. PREPARATION FOR THE INSPECTION MODE1. Check that the battery voltage is 12 V o ...