Subaru Legacy BN/BS (2015-2019) Owners Manual: To decrease the speed (by brake pedal)

Subaru Legacy BN/BS (2015-2019) Owners Manual / Starting and operating / Cruise control / To change the cruising speed / To decrease the speed (by brake pedal)

Depress the brake pedal to release cruise control temporarily.

To decrease the speed (by brake pedal)

When the speed decreases to the desired speed, press the "RES/SET" switch to the "SET" side once. Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pedal.

Cruise control indicator

Refer to "Cruise control indicator" .

Cruise control set indicator

Refer to "Cruise control set indicator" 32.

To decrease the speed (by the "RES/SET" switch)

Press the "RES/SET" switch to the "SET" side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and treated a ...

BSD/RCTA (if equipped)

The BSD/RCTA consists of rear radar with Blind Spot Detection and Rear Cross Traffic Alert. These functions of BSD/RCTA are the systems that detect objects and vehicles to the rear and draw att ...

Other materials:

Assembly
1. Clean the holes in the sliding surface between the clutch pedal and bushing, and apply grease.2. Attach the clutch pedal pad, clutch pedal stopper, bushing A, torsion spring bushing, spacer and bushing to the clutch pedal.NOTE:Clean the inside of the bushings and apply grease before installing th ...