Subaru Legacy BN/BS (2015-2019) Owners Manual: To increase the speed (by accelerator pedal)
- Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.

- Press the "RES/SET" switch to the
"SET" side once. Now the desired speed is set and the vehicle will keep
running at
that speed without depressing the accelerator
pedal.
|
Press the "RES/SET" switch to the "RES"
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated a ...
Press the "RES/SET" switch to the "SET"
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated a ...
Other materials:
Dtc p0507 idle control system rpm - higher than expected
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:Engine keeps running at higher speed than specified idle speed.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspe ...