Subaru Legacy BN/BS (2015-2019) Service Manual: Torque converter assembly

Installation

CAUTION:Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.1. Install the secondary speed sensor.NOTE:• ...

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Pull out the torque converter assembly horizontally.CAUTION:Do not scratch the inside of engaging par ...

Other materials:

Inspection
1. Check the setting by performing Keyless access system check using the Subaru Select Monitor. Keyless Access System Check > OPERATION2. Disconnect the Subaru Select Monitor. After placing the access key near the changed antenna, operate the push button ignition switch to check that the power can ...