Subaru Legacy BN/BS (2015-2019) Service Manual: Transmission harness

Installation

1. Install the TCM.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the harness connector to TCM.NOTE:• Install the connector in the reverse order of removal.• Move the lo ...

Removal

1. Remove the transmission from the vehicle. Automatic Transmission Assembly > REMOVAL2. Prepare for overhaul. Preparation for Overhaul3. Remove the transmission harness ground terminal and remove t ...

Other materials:

Inspection
NOTE:When adding the engine coolant, always use SUBARU Super Coolant.1. Park the vehicle on a level surface.2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant.(1) Make sure the engine coolant level in the reservoir tank ...