Subaru Legacy BN/BS (2015-2019) Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)
Subaru Legacy BN/BS (2015-2019) Service Manual / Infotainment system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc u0327 software incompatibility with vehicle security control module
- Dtc u0100 lost communication with ecm/pcm "a"
- Dtc u0164 lost communication with hvac control module
- Dtc u0155 lost communication with instrument panel cluster (ipc) control module
- Dtc b224a backup camera
- Dtc b2240 can communication (audio) stuck
- Dtc u0128 lost communication with park brake control module
- Dtc u0122 lost communication with vehicle dynamics control module
- Dtc b2249 bluetooth module
- Dtc b2247 cd mechanical
- Dtc b2244 amplifier communication
- Dtc b2243 sd card communication
- Dtc b2242 uart communication
- Dtc b2241 can communication
- Dtc u1232 lost communication with rear/side radar control module
- Dtc u1140 lost communication with body control module body-can
- Dtc u0167 lost communication with immobilizer control module
- Dtc u0074 control module communication bus "body-can" off
- Dtc u0101 lost communication with tcm
Wiring diagram
Refer to “Audio System” in the wiring diagram. Audio System > WIRING DIAGRAMRefer to “Navigation System” in the wiring diagram. Navigation System > WIRING DIAGRAMRefer to &ld ...
Dtc u0327 software incompatibility with vehicle security control module
Detected when CAN data is not received from keyless access CM.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...
Other materials:
Installation
1. Install the air intake boot, and connect the PCV hose.2. Tighten the clamp (C) securing the throttle body to the air intake boot.Tightening torque:3 N·m (0.3 kgf-m, 2.2 ft-lb)3. Tighten the clamp (B) securing the air cleaner case (rear) to the air intake boot.Tightening torque:3 N·m ...
© 2017-2026 Copyright www.sulegacy.com
