Subaru Legacy BN/BS (2015-2019) Service Manual: Stop light switch

Installation

NOTE:Before installation, remove mud and foreign matter from the disc brake assembly.1. Check the rear disc rotor. Rear Disc Rotor > INSPECTION2. Install the rear disc rotor.NOTE:When installing the ...

Removal

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Low ...

Other materials:

Installation
1. SEDAN MODEL1. Replace the light assembly gasket with a new part.2. Install the light assembly - rear combination.CAUTION:Be careful not to catch the harness in between the parts.Tightening torque:4.5 N·m (0.5 kgf-m, 3.3 ft-lb)3. Install the trunk trim panel - side.4. Connect the ground ter ...