Subaru Legacy BN/BS (2015-2019) Service Manual: Transfer clutch
1. Install the O-ring to the input shaft.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.2. While holding the torque converter assembly by hand, carefully install it into the torque con ...
1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the extension case. Extension Case > REMOVAL3. Remove the transfer clutch assembly.4. Remove the thrust bearin ...
Other materials:
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the power rear gate inner switch.(1) Release the claws and pull out the power rear gate inner switch rearward.NOTE:Insert a flat tip screwdriver wrapped with protective tape into the slit on the left.(2) Disconnect the connector a ...